BWWMK - PRO-100 DEVELOPER FLUID IN POD OF FILM TYPE POLACOLOR
- MSDS: BWWMK
- Manufacturer: POLAROID CORP
- Product Name: PRO-100 DEVELOPER FLUID IN POD OF FILM TYPE POLACOLOR
- National Stock Number: 6750-00F039194
Product Identification
Product ID:PRO-100 DEVELOPER FLUID IN POD OF FILM TYPE POLACOLOR
MSDS Date:01/04/1993
FSC:6750
NIIN:00F039194
MSDS Number: BWWMK
Responsible Party
WALTHAM, MA 02254-5000
US
Emergency Phone: 617-684-3646
Info Phone: 617-684-3646
Preparer: E KARGER
Cage: 0E411
Contractor
Telephone: 617-684-3646
Cage: 0E411
Ingredients
POTASSIUM HYDROXIDE
CAS: 1310-58-3
RTECS: TT2100000
Fraction By Weight: 5-10%
ACGIH TLV: 2 MG/CUM (CEILING)
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
3,5-DIMETHYL PYRAZOLE *95-1*
CAS: 67-51-6
RTECS: UQ6477600
Fraction By Weight: 0.1-1%
HYPOXANTHINE *95-1*
CAS: 68-94-0
RTECS: UP0791000
Fraction By Weight: 1-5%
1-BUTYL-2-METHYLPYRIDINIUM BROMIDE
CAS: 26576-84-1
Fraction By Weight: 1-5%
6-METHYLURACIL *95-1*
CAS: 626-48-2
RTECS: YR0700000
Fraction By Weight: 0.1-1%
SODIUM HYDROXIDE, CAUSTIC SODA, LYE
CAS: 1310-73-2
RTECS: WB4900000
Fraction By Weight: 0.5-1.5%
OSHA PEL 2 MG/CUM
ACGIH TLV: 2 MG/CUM CEILING
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY BE AN IRRITANT. SKIN:
CORROSIVE, BURNS, IRRITATION. EYES: CORROSIVE, PERMANENT DAMAGE.
INGESTION: CORROSIVE, BURNS/IRRITATION TO MOUTH.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, BURNS
First Aid
First Aid:EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN:
FLUSH W/PLENTY OF WATER. INGESTION: RINSE MOUTH W/PLENTY OF WATER.
DRINK WATER/CITRUS JUICES TO DILUTE/NEUTRALIZE ANY ALKALI. DON'T
INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES. NOTE TO
PHYSICIAN: PROLONGED CONTACT W/SKIN MAY PRODUCE ALKALI BURNS.
Fire Fighting
Flash Point Method:TCC
Extinguishing Media:MIXTURE WILL NOT BURN.
Accidental Release
Spill Release Procedures:HANDLE FILM SO AS NOT TO BREAK DEVELOPER PODS
PRIOR TO FILM DEVELOPMENT. SMALL QUANTITIES OF DEVELOPER FLUID MAY
BE WIPED UP W/A DAMP PAPER TOWEL USING CARE TO AVOID TO AVOID ANY
SKIN/EYE CONTACT.
Handling
Other Precautions:DON'T GET IN EYES, ON SKIN/CLOTHING.
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED
Ventilation:NOT NORMALLY REQUIRED. LARGE QUANTITIES OF FILM SHOULD BE
HANDLED W/LOCAL EXHAUST VENTILATION.
Protective Gloves:LARGE: NEOPRENE/NITRILE/BUTYL RUBBER
Eye Protection:NOT NORMALLY REQUIRED
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Spec Gravity:1.1
pH:>13
Evaporation Rate & Reference:(BU AC=1): <1
Solubility in Water:COMPLETE
Appearance and Odor:CREAM/WHITE/TAN/GREY/PINK VISCOUS FLUID
W/OBJECTIONABLE PUNGENT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.